How Do Electricians Install A Replacement Bathroom Exhaust Fan?

One of the main reasons why you might be dealing with bacteria & mildew in your bathroom is because you don’t have a working exhaust fan. An exhaust fan greatly helps in preventing any mildew or mould growth inside your bathroom, as it offers enough ventilation inside a closed space. Therefore, in case you’re planning to eliminate mould from your bathroom, the first step should be to replace your old exhaust fan and install a new one.

Since installing an exhaust fan isn’t easy, we’d highly suggest you hire a professional electrician in Perth for the task. Additionally, we’ll be taking a look at the process using which an electrician installs a replacement exhaust fan inside your bathroom.

Steps Taken By An Electrician To Install A Replacement Exhaust Fan Inside Your Bathroom

Step #1

The first step involves turning off the switch or the breaker that is responsible for supplying power to the exhaust fan. This is the most significant step involved in the entire procedure because if the electric supply isn’t turned off, then it can lead to severe accidents.

Once the power supply to the fan is cut down, the electrician will then remove the cover of the exhaust fan, use his or her multimeter and check whether there’s any power running through it.

Step #2

The time has come for the electricians to remove the old fan. It can be possible that your bathroom fan cover might have screws holding it in place or it might use a snap-on cover. Once the electrician proceeds to remove the cover, the vent pipe, as well as the wires, will be instantly disconnected.

Step #3

Once the old fan has been successfully removed, it’s time to clean the area. The electrician will make the area spotless and eliminate any dirt, dust, debris and grime. According to an electrician offering meter box upgrade services in Perth, cleaning the exhaust vent will ensure that the new fan will perform in the best possible manner.

The electrician may also use a vacuum cleaner to eliminate the dust & debris, and then remove the grime using a simple cotton cloth.

Step #4

The electrician will then inspect the exhaust fan duct and see whether it’s venting on the home’s exteriors properly. The primary job of an exhaust fan is to simply release the moisture into the home exteriors and the duct forms the pathway for the same.

So, if the duct isn’t working as intended, the same will be fixed before the new fan will be installed.

Step #5

Finally, it’s time for the new exhaust fan to be installed in place of the old one.

Proper wiring for the power supply will be attached to the new fan and the same will be checked whether it’s working properly, as intended.